Carved wooden chain: finished

Here is the finished carved wooden chain.

It didn’t take much more work to clean off the links.

The biggest job as always was the sanding, working through 80 grit, down to 320, to achieve a really smooth finish.

You can’t see it very well here, but there is some interesting spalting in the beech, which runs through the first links, giving it a mottled effect.

The finish is our own beeswax polish.

My next project is a tray to take some tiles we bought in South Africa. But for now the garden calls. There are seeds to plant and a new hedge to lay.

 

Carved wooden chain: part 2

We resume work on my wooden chain with the difficult process of freeing up the individual elements.

 

 

 

 

 

 

In the first picture above you can see the hook end with most of the material removed. All that is left is the tricky bit, removing the wood in the tight gap joining the hook to the next link. The first part to remove is here in the second picture, and easy to get at. The third picture shows the result of another hour’s work, nibbling away at the wood between links and freeing them up. For the first time we have completely separate pieces of wood, linked together.

It now becomes a somewhat repetitive task, working along the links, freeing them from each other. At this point they are far from finished. A lot of work still needs to be done to even up the chain shapes.

This is the point where I leave it for now. All the links are free, but in need of a few more days work to finish them off. Time I don’t have right now as I have work to do to prepare for a blacksmith experience day this weekend.

I can also explain the first question posed, about making a single piece of wood longer than you started. The links as drawn on the original piece needed gaps between them to allow a chisel in. By the time the links are thinned out and finished off they will stretch out further and so the chain will still be make from a single piece, but will be longer than the original block it is made from.